Router-1#

Router-1#

Router-1#term leng 0

Router-1#sh ru

Building configuration...

Current configuration:

!

version 12.0

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Router-1

!

enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1

!

!

!

!

!

ip subnet-zero

ip tcp synwait-time 15

no ip domain-lookup

!

ip audit notify log

ip audit po max-events 100

cns event-service server

!

!

!

!

end

Router-1#config t

Enter configuration commands, one per line. End with CNTL/Z.

Router-1(config)#no service password-recovery

WARNING:

Executing this command will disable password recovery mechanism.

Do not execute this command without another plan for password recovery.

Are you sure you want to continue? [yes/no]: yes

Router-1(config)#end

Router-1#

00:04:00: %SYS-5-CONFIG_I: Configured from console by console

Router-1#wr mem

Building configuration...

[OK]

Router-1#sh ru

Building configuration...

Current configuration:

!

version 12.0

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

no service password-recovery

!

hostname Router-1

!

enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1

!

!

!

!

!

ip subnet-zero

ip tcp synwait-time 15

no ip domain-lookup

!

ip audit notify log

ip audit po max-events 100

cns event-service server

!

!

!

!

end

Router-1#reload

Proceed with reload? [confirm]

00:05:00: %SYS-5-RELOAD: Reload requested

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 49152 Kbytes of main memory

PASSWORD RECOVERY FUNCTIONALITY IS DISABLED

program load complete, entry point: 0x80008000, size: 0x928024

Self decompressing the image : #######################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

###############################################################################################################

####################################################################### [OK]

!Do Not issue the break sequence here!!!!

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 07:11 by phanguye

Image text-base: 0x80008088, data-base: 0x8107A5D0 !Issued Break Sequence Here

PASSWORD RECOVERY IS DISABLED.

Do you want to reset the router to factory default

configuration and proceed [y/n] ? !Answer this question with a “y”

Reset router configuration to factory default.

Compliance with U.S. Export Laws and Regulations - Encryption

This product performs encryption and is regulated for export

by the U.S. Government.

This product is not authorized for use by persons located

outside the United States and Canada that do not have prior

approval from Cisco Systems, Inc. or the U.S. Government.

This product may not be exported outside the U.S. and Canada

either by physical or electronic means without PRIOR approval

of Cisco Systems, Inc. or the U.S. Government.

Persons outside the U.S. and Canada may not re-export, resell,

or transfer this product by either physical or electronic means

withoutprior approval of Cisco Systems, Inc. or the U.S.

Government.

cisco 2620 (MPC860) processor (revision 0x102) with 39936K/9216K bytes of memory.

Processor board ID JAD042206GN (1804004596)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

!Now for some reason (I have not figured it out yet) the router acts as though you just issued the command again

!and gives you a chance to reverse the command

WARNING:

Executing this command will disable password recovery mechanism.

Do not execute this command without another plan for

password recovery.

Are you sure you want to continue? [yes/no]: no!As you can see I answered no to the question

Press RETURN to get started!

Passed

00:00:36: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

00:00:36: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down

00:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down

00:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down

00:00:48: %SYS-5-CONFIG_I: Configured from memory by console

00:00:48: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C260Translating "Router-1"

Router-1>0-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 07:11 by phanguye

00:00:49: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

00:00:49: %LINK-5-CHANGED: Interface Serial0/0, changed state to administratively down

00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router-1>en

Password:

00:00:57: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down

!

!My config is still there

!

Router-1#sh ru

Building configuration...

Current configuration:

!

version 12.0

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Router-1

!

enable secret 5 $1$sCnF$E51c1b/cHBjLYLw.zcboU1

!

!

!

!

!

ip subnet-zero

ip tcp synwait-time 15

no ip domain-lookup

!

ip audit notify log

ip audit po max-events 100

cns event-service server

!

!

!

!

end

Router-1#

Router-1#

Router-1#

Router-1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 07:11 by phanguye

Image text-base: 0x80008088, data-base: 0x8107A5D0

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router-1 uptime is 1 minute

System returned to ROM by reload

System image file is "flash:c2600-jo3s56i-mz.120-7.T.bin"

cisco 2620 (MPC860) processor (revision 0x102) with 39936K/9216K bytes of memory.

Processor board ID JAD042206GN (1804004596)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router-1#